Application
Practical guide for applying B6-182 and installing the Automatic Extinguisher
Clear, simple and reliable steps for field technicians, engineers and installers.
These procedures ensure optimal performance of the B6-182 coating and the FireProtecx Automatic Extinguisher module.
B6-182 Application (Porous surfaces: wood, cardboard)
-
Surface preparation:
Remove dust, grease and loose particles.
Wood moisture should be < 15%. Light sanding recommended.
-
First coat:
Apply using brush, roller, or HVLP sprayer.
Target thickness: 0.6–1.0 mm.
Drying time: 60–90 minutes.
-
Second coat:
Apply uniformly. Ensure edges and joints are fully covered.
-
Curing:
Initial cure: 24 hours.
Functional cure before fire exposure: 72 hours.
-
Optional top coat:
Water-based protective or decorative finish may be applied after curing.
-
Safety:
Use gloves, mask and ensure proper ventilation.
Product is non-toxic and water-based.
For metal surfaces, lightly sand to create an anchor profile and apply a compatible primer.
Automatic Extinguisher — Installation
- Designed for closed or semi-closed spaces (electrical cabinets, small compartments, machinery housings).
- Mount securely on a rigid surface using included brackets.
- Avoid areas with direct condensation or dripping moisture.
- Perform annual functional checks and replace module as needed.
- Do not obstruct the discharge direction of the nozzle.
Recommendations
- Combine with a site-specific fire risk assessment.
- Document installation with photos and dates for traceability.
- Train staff in basic fire response and portable extinguisher use.
Request technical assistance
Need help with field deployment, pilot testing, or remote training?
Our team provides direct support to integrate B6-182 and the extinguisher into your operation.
Request Support
Run Risk Assessment
Do you know the fire-risk level of your facility?
Complete the free assessment and automatically receive a detailed PDF report with recommendations.
Start Assessment